Millson 42ft hybrid 2 decker © Millson Ltd 2010 Made with Xara In these pictures is a Millson 42ft 2 deck cattle box  5’ 10” deck heights with split heights on the neck of 5’ 4”. 150mm vents. The decker is 15’ 3” O/A height 2550mm wide BPW axles 19.5 low profile rims Wabco EBS braking and suspension system Front lift axle The box has a built in Effluent tank that is attached to the box for easy removal. it also has a big door on one end for easy wash out. The quater panels have fully welded channels built in to improve the wash out time and to make it easier. The entrance to the box has been made to its maximum capability and inside the box has been made to maximum width to customers requirements. The ramp is set to 26 degrees with wide cattle doors and a flap to reduce the step. The cattle doors are installed with slam lock catches that are all slimline to reduce anything been caught on them. The quater panels are fully welded and fully contained this improves strength and reduces dirt traps to reduce the risk of contamination. SPECS: 5mm sides 6mm check floor 4mm roof 4mm doors quater doors fully welded box not bolted to give maximum strength. built in effluent tank slam catch doors 150mm vents smooth underside middle floor 12ft rear section